Characteristics and applications of steel plate gantry shearing machine

Release time:

2023-12-14

The shearing force of the gantry shearing machine ranges from 100 tons to 250 tons. Main material size to be cut (12~20mm)*250mm. The number of cuts is 8 to 12 times per minute.

The shearing force of the gantry shearing machine ranges from 100 tons to 250 tons. Main material size to be cut (12~20mm)*250mm. The number of cuts is 8 to 12 times per minute.

Compared with mechanical transmission shears, gantry shears have the characteristics of small size, light weight, small movement inertia, low noise, smooth movement, flexible operation, and large shearing section. Hydraulic and electrical integrated control can implement single and continuous action conversion, is simple and convenient to use, can stop and run at any working position, and is easy to implement overload protection. It has a wide range of applications. It can be used not only as processing equipment for metal recycling and processing units, but also as furnace charge processing in factory casting workshops and metal shearing processing equipment in the mechanical construction industry.

Gantry shears are mainly used for cutting steel plates, copper plates, nickel plates and other metal plates.

Latest News

How to choose between straw round baler and square baler?

Our country is a large agricultural country with very rich crop straw resources. With the advancement of straw resource utilization in recent years, the comprehensive utilization of straw has also shown a good development trend. According to data released by the "Experience Exchange Activity on Comprehensive Utilization of Straw" recently held in Liaoning Province, my country's comprehensive utilization rate of straw has reached 85.45%. In this process, the development of straw balers can be said to have played an important role.

What to do if the straw baler breaks down?

With the rapid development of society, many jobs have become mechanized, especially in agricultural production. From sowing to harvesting, everything is operated by machines. Among them, the straw baler is a mechanical equipment used to harvest straw. Many times, the straw baler breaks down. So, what should we do if the straw baler breaks down? Next, the baler manufacturer Yuanhang Agricultural Machinery will give you a brief introduction!

Scrap steel hydraulic shearing machine gantry shearing machine maintenance

Operate strictly in accordance with the operating procedures.

How to choose hydraulic oil for waste paper baler

According to the relatively high ambient temperature (30-50°C) of the papermaking workshop, usually the L-HI32 and I-HL46 domestic hydraulic oil used in the waste paper baler can meet the requirements;

Composition and advantages of hydraulic system

A complete hydraulic system consists of five parts, namely power components, actuating components, control components, auxiliary components and hydraulic oil.

Characteristics and applications of steel plate gantry shearing machine

The shearing force of the gantry shearing machine ranges from 100 tons to 250 tons. Main material size to be cut (12~20mm)*250mm. The number of cuts is 8 to 12 times per minute.

Tel : +86-13256247897

WhatsApp : +447999906759

Wechat : 13256247897

Email : DezhouShengxinMachinery@gmail.com

Addess：Factory Building No. 2, No. 66, South Provincial Road 353, Luoli Village, Toutousi Town, Canal Economic Development Zone, Dezhou City, Shandong Province

GET A FREE QUOTE