Scrap steel hydraulic shearing machine gantry shearing machine maintenance

Release time:

2023-12-14

Operate strictly in accordance with the operating procedures.

1. Operate strictly in accordance with the operating procedures.

2. Before starting the machine, add lubricating oil regularly, at fixed points and quantitatively according to the lubrication chart. The oil should be clean and free of sediment.

3. The machine tool must be kept clean at all times and the unpainted parts must be coated with anti-rust grease.

4. The lubricating oil in the motor bearings should be replaced and refilled regularly, and the electrical parts should be regularly checked to see if they are working normally, safely and reliably.

5. Regularly check whether the V-belt, handle, knobs, and buttons are damaged. If the wear is serious, replace it in time and report spare parts for replenishment.

6. Regularly check and repair switches, insurances, and handles to ensure they work reliably.

7. 10 minutes before get off work every day, lubricate and scrub the machine tool.

8. It is strictly prohibited for non-professional personnel to operate this equipment. Normally, the machine must be stopped when people are away from it. It is mainly used in the waste material recycling and processing industry. Small and medium-sized steel plants can cold shear scrap metals with various cross-section shapes such as round steel, square steel, channel steel, angle steel, I-beam, steel plate, steel pipe and other scrap metals.

Latest News

How to choose between straw round baler and square baler?

Our country is a large agricultural country with very rich crop straw resources. With the advancement of straw resource utilization in recent years, the comprehensive utilization of straw has also shown a good development trend. According to data released by the "Experience Exchange Activity on Comprehensive Utilization of Straw" recently held in Liaoning Province, my country's comprehensive utilization rate of straw has reached 85.45%. In this process, the development of straw balers can be said to have played an important role.

What to do if the straw baler breaks down?

With the rapid development of society, many jobs have become mechanized, especially in agricultural production. From sowing to harvesting, everything is operated by machines. Among them, the straw baler is a mechanical equipment used to harvest straw. Many times, the straw baler breaks down. So, what should we do if the straw baler breaks down? Next, the baler manufacturer Yuanhang Agricultural Machinery will give you a brief introduction!

Scrap steel hydraulic shearing machine gantry shearing machine maintenance

Operate strictly in accordance with the operating procedures.

How to choose hydraulic oil for waste paper baler

According to the relatively high ambient temperature (30-50°C) of the papermaking workshop, usually the L-HI32 and I-HL46 domestic hydraulic oil used in the waste paper baler can meet the requirements;

Composition and advantages of hydraulic system

A complete hydraulic system consists of five parts, namely power components, actuating components, control components, auxiliary components and hydraulic oil.

Characteristics and applications of steel plate gantry shearing machine

The shearing force of the gantry shearing machine ranges from 100 tons to 250 tons. Main material size to be cut (12~20mm)*250mm. The number of cuts is 8 to 12 times per minute.

Tel : +86-13256247897

WhatsApp : +447999906759

Wechat : 13256247897

Email : DezhouShengxinMachinery@gmail.com

Addess：Factory Building No. 2, No. 66, South Provincial Road 353, Luoli Village, Toutousi Town, Canal Economic Development Zone, Dezhou City, Shandong Province

GET A FREE QUOTE